Engineering and Automation Services
Nine disciplines, one accountable team — so the interfaces between the machine, the panel, the controls and the software get designed rather than negotiated between vendors.
Geek Engineering provides nine engineering services: automation and controls, electrical and mechanical design, OEM and manufacturing engineering, software development, IT services, applied AI, research and development, training, and consulting. Projects that touch several of these are coordinated within one engagement, so responsibility for the interfaces between mechanical, electrical, controls and software scope sits with one team.
Which service do you actually need?
Each row states the situation the service is for and what you receive at the end of it.
| Service | Choose it when | Typical deliverables |
|---|---|---|
| Automation & controls | Equipment already runs and the controls need programming, fixing, documenting or migrating | Program backups, revised logic, HMI/SCADA revisions, as-found documentation |
| Engineering design | Something has to be built and a shop needs a package to build it from | Schematics, panel layouts, CAD models, P&IDs, BOMs, as-builts |
| OEM & manufacturing engineering | You build machines and need build 10 to match build 1 | Design package, reusable controls standards, launch documentation |
| Software development | Machine data has to reach people or business systems | Application, data pipeline, dashboards, integration, deployment docs |
| IT services | Plant and office IT need support without stopping production | Segmented network design, backup/restore proof, managed support |
| Applied AI | A specific operational decision might be improved by a model | Readiness assessment, scoped pilot with acceptance criteria |
| R&D | The concept has an unresolved assumption that decides viability | Feasibility findings, proof-of-concept, test records |
| Training | The team depends on outside help for routine work | Sessions on your equipment, reference material, capability boundary |
| Consulting | A decision is expensive and hard to reverse | Measured findings, options with real trade-offs, recommendation |
Services, solutions and guides — what the difference is
Three parallel clusters run through this site. This is what separates them.
| If you want… | Go to | Example |
|---|---|---|
| A capability described in full | Services | Automation & controls |
| A packaged engagement with a defined scope | Solutions | Control System Modernization Blueprint |
| To learn how to run the project yourself | Resources | How to select an automation integrator |
Last reviewed by Geek Engineering senior engineering review.
Nine Services. One Accountable Engineering Team.
Cross-disciplinary capabilities tailored to modernize operations, design precision products, develop integrated software, and train the next generation of engineers.
Why Choose Geek Engineering?
Nine services, one engineering team, and no handoffs between vendors at the points where projects usually break: the seams between the machine, the panel, the code, and the data.
Technical Expertise Across Disciplines
Electrical engineering, mechanical design, industrial controls, and software development are coordinated by one team, so the interfaces between them are designed rather than negotiated between vendors.
Practical Iteration, Engineering Rigor
Ideas are tested early and cheaply, then carried into designs that reference the IEEE, NEC, and ISO requirements applicable to each project.
End-to-End Delivery
From feasibility analysis and CAD design through panel build coordination, software, onsite commissioning, and scoped post-project support, under a single point of responsibility.
Proof Before Scale
R&D, prototypes, and pilots confirm that an approach works before a full rollout is committed, so the expensive decision is made against evidence.
Standards referenced as applicable
Deliverables are designed with reference to the national and international standards applicable to each project's scope. These are references, not certifications held.
Choosing a service: common questions
Can Geek Engineering take on a project that spans several of these services?
Yes — that is the usual case rather than the exception. A machine retrofit typically involves mechanical design, electrical design, controls programming, software and IT scope at once. Coordinating them within one engagement is the reason the services are offered together, because the interfaces between them are where most project failures originate.
Can Geek Engineering be engaged for one narrow piece of work?
Yes, where the piece is well defined — a drawing package, a program recovery, a design review, a training session. Very small single-trade jobs and volume staffing are not a good fit, and saying so early saves everyone time.
Who owns the code, drawings and documentation at the end?
The client owns the deliverables. Programs, drawings, models, source code and as-built documentation are handed over at project close. Ownership terms are worth confirming in writing with any integrator before work starts.
What does Geek Engineering need in order to quote?
The objective, the equipment or process involved, the constraints that are actually fixed, the target timeline, and whatever documentation exists — drawings, program backups, photos, manuals, data. Outdated drawings are still useful; they establish the starting point. Sensitive material can be discussed before any transfer.
What platforms does Geek Engineering work in?
Work is performed in the platforms already installed at the site, commonly including Allen-Bradley, Siemens and Mitsubishi control environments, and standard electrical and mechanical CAD tools. Platform choice on a new system is treated as an engineering decision driven by spare-part availability, in-house familiarity and support life — not by a vendor relationship.
Does Geek Engineering work outside the Chicago area?
Yes. Design, programming, documentation and software work is routinely delivered remotely across the United States. Onsite phases are scoped against site access, safety requirements, schedule and travel.
Ready to Engineer a Smarter Solution?
Tell us about your project constraints, operational challenges, or technology goals. A senior engineer will review your requirements and respond with questions, a proposed approach, and the next concrete step.
Serving Greater Chicagoland, Illinois, and qualified U.S. projects